The Vism Glock Pro Tool has 5 separate quick detachable tool bits to service Glock pistols. The handle has rubberized textured panels. It features a magnetic 3/16 inch hex nut driver for the front sight, channel liner removal tool, hardened steel 3/32 in (2.5mm) disassembly tool, channel liner install tool, and flat and Phillips screwdriver bit. The tool handle has a cavity for holding the firing pin and spacer in place for easier assembly and disassembly of the firing pin spring and spring cups. The bits can be stored inside the hollow of the handle.

• 5 separate detachable tool bits
• Magnetic 3/16 inch hex nut driver; Hardened steel 3/32” (2.5mm) disassembly tool; Channel liner install and removal tool; Flat/Phillips screwdriver
• Tool handle has a rubber textured panels
• Polymer and Steel construction
• Tool handle has a cavity for holding the firing pin and spacer in place for easier assembly/ disassembly of the firing pin spring and spring cups
• Quick detachable tool bits can be stored inside the hollow handle